OBIS LX 785 nm 50 mW Laser, Single Frequency Narrow Linewidth

OBIS LX 785 nm 50 mW Laser, Single Frequency Narrow Linewidth

SKU 2253321
UOM Each

High Performance Laser. 785 nm wavelength with 50 mW of output power with a superior quality circular beam. Linewidth < 0.7 pm. Single Frequency.


Price $3,595.00 USD


Details

OBIS lasers now with single frequency and narrow linewidth. These are direct diode laser modules with an internal Volume Holographic Grating (VHG) to create a single frequency, long coherence length laser for single longitudinal mode (SLM) applications.

OBIS LX SF at 785 nm can support demanding applications such as Raman Spectroscopy.

High signal and low noise gives your application exceptional signal-to-noise ratio (SNR).

OBIS Lasers offer superior performance and reliability.

OBIS LX Lasers are built with Direct Diode technology.

Exceptional beam quality (M² ≤ 1.5) and low noise (RMS ≤ 0.05%) provides your application with high Signal-to-Noise ratio and contrast.

Designed for the most demanding Life Science, Medical and Semiconductor Markets.

Operate in Continuous Wave (CW) mode with output power control via host computer (USB or RS-485).

Requires +12 Volts DC power. Order Power Supply separately or OBIS Remote separately.

Order OBIS Heatsink separately for easy mounting and cooling.

Specs

General

Free-Space or Fiber Pigtailed
Free-Space
Wavelength (nanometers)
785
Wavelength Color
Red
Power (milliwatts)
50
Beam Type
Circular Beam
M² (Beam Quality at 90/10 Clip Levels) Maximum
1.5
Beam Diameter at 1/e² (millimeters)
0.85
Beam Divergence (milliradians, full-angle) Maximum
2
Beam Asymmetry (%) Minimum
80
RMS Noise (%) (20 hertz to 20 megahertz) Maximum
0.05
Peak-to-Peak Noise (%, 20 hertz to 20 kilohertz) Maximum
0.5
Long-term Power Stability (%, 8 hours, ±3°C) Maximum
1
Pointing Stability (µrad, over 2 hours after warm-up and ±3°C) Maximum
30
Pointing Stability Over Temperature (microradians/°C) Maximum
5
Polarization Ratio (X:1) Minimum
100
Polarization Azimuth
Vertical
Polarization Azimuth Tolerance (± X° angle) Maximum
5
USB
Yes
Communication
USB
Communication
RS-485
Laser Drive Mode 1
Continuous Wave (CW)
Beam Position Tolerance from Exit Aperture (millimeters) Maximum
1
Beam Angle Tolerance from Exit (milliradians) Maximum
5
Warm-up Time (minutes, from cold start) Maximum
5
Laser Baseplate Temperature (°C) Maximum
50
Ambient Temperature, Operating Condition (°C) Minimum
10
Ambient Temperature, Operating Condition (°C) Maximum
50
Storage Temperature (°C) Minimum
-20
Long-term Wavelength Stability (pm) (8 hrs., ±2°C) typical
< 2
Storage Temperature (°C) Maximum
60
Linewidth (MHz) (typical)
50
Linewidth (pm) (maximum)
0.7
Spectral Purity (SMSR) (typical) (dB)
40
Shock Tolerance (g, 6 milliseconds) Maximum
30
Humidity, Operating
See Operator's Manual
Power Consumption (watts) Typical
5
Power Consumption (watts) Maximum
13
Laser Safety Classification
3b
LS or LX Type
LX
Operating Voltage (Volts DC)
12
ESD Protection
EN61326-1
Spatial Mode
Single Mode, TEM00
Beam Diameter at 1/e² (millimeters) Minimum
0.75
Beam Diameter at 1/e² (millimeters) Maximum
0.95
Wavelength Minimum (nanometers)
784
Wavelength Maximum (nanometers)
786
Dimension, Length (millimeters)
70
Dimension, Width (millimeters)
40
Dimension, Height (millimeters)
38
Weight (kilograms)
0.16
Dimension, Height (inches)
1.5
Dimension, Length (inches)
2.75
Dimension, Width (inches)
1.57

Resources

Assembly Guides
Datasheets
Owner's Manuals
Drawings
Software

Those Who Bought this Also Looked At