Laser Accessories

12V Power Supply for FieldMate, FieldMaxII, LabMax, LabMax-Pro, StingRay

SKU: 1105427

12V External Power Supply for FieldMate, FieldMaxII, LabMax, LabMax-Pro, and StingRay/Bioray Controller.

CUBE Interface Cable, Quattro

SKU: 1072166

For CUBE Laser, connects laser to the following: Power cable, I/O Interface Control cable, RS-232 Serial cable, Control Box (Keyswitch, Analog Modulation and Interlock)

CUBE Power Supply, 6 Volts DC Output

SKU: 1072454

For CUBE Laser, Output: 6 Volts DC, 2.5 A, On/Off Toggle Switch, Power On LED Indicator

Input: 90 – 264 Volts AC, 47 – 63 Hz, < 0.5 A (maximum) Power Consumption

CUBE Control Box, CDRH Compliant

SKU: 1039966

For CUBE Laser, includes an On / Off key switch, an interlock circuit, BNC connector for Analog modulation up to 350 kHz, LED indicator, and a 5-second delay for CDRH regulations.

CUBE Heat Sink

SKU: 1073840

Optional Heat Sink Mount for CUBE Laser. This mount was designed for proper thermal heat dissipation and mechanical positioning. 

High-Speed USB-to-Serial RS-232 Adapter

SKU: 1415602

USB 2.0 Type B male to Serial 9-pin male with 3 ft USB cable. Allows connection of a serial RS-232 device (CUBE laser) to a host computer with a USB Type-A port. Three foot detachable USB Type-A Male to USB Type-B Male cable included. Compatible with Windows XP, 7, and 10.

BANDPASS FILTER, 473 nm, OBIS LX, Pass 468-478 nm

SKU: 1265260

For 473 nm laser applications that are sensitive to longer wavelength emissions, the OBIS Bandpass filter can help to improve your detection signal to noise ratio.

BANDPASS FILTER, 488 nm,OBIS LX, Pass 485-491 nm

SKU: 1263515

For 488 nm laser applications that are sensitive to longer wavelength emissions, the OBIS Bandpass filter can help to improve your detection signal to noise ratio.

BANDPASS FILTER, 633 nm 637 nm, OBIS LX, Pass 630-642 nm

SKU: 1202061

For 633 nm and 637nm laser applications that are sensitive to longer wavelength emissions, the OBIS Bandpass filter can help to improve your detection signal to noise ratio.

BANDPASS FILTER, 640 nm, OBIS LX, Pass 635-645 nm

SKU: 1202062

For 640 nm laser applications that are sensitive to longer wavelength emissions, the OBIS Bandpass filter can help to improve your detection signal to noise ratio.

OBIS Modulation Interface, Analog and Digital Modulation, SDR

SKU: 1319290

Compact board-level Modulation Interface. SMB connector for Analog Modulation control input. SMB Connector for Digital Modulation control input. Plugs directly into OBIS laser.

ASE Filter, 405 nm, for OBIS LX Single Frequency Lasers

SKU: 2253957

OBIS LX ASE Filter can reduce noise in applications that are sensitive to shorter or longer wavelength emissions. The OBIS LX ASE Filter can help to improve your detection signal to noise ratio.

ASE Filter, 633 nm, for OBIS LX Single Frequency Lasers

SKU: 2253959

OBIS LX ASE Filter can reduce noise in applications that are sensitive to shorter or longer wavelength emissions. The OBIS LX ASE Filter can help to improve your detection signal to noise ratio.

ASE Filter, 785 nm, for OBIS LX Single Frequency Lasers

SKU: 2254008

OBIS LX ASE Filter can reduce noise in applications that are sensitive to shorter or longer wavelength emissions. The OBIS LX ASE Filter can help to improve your detection signal to noise ratio.

Mount for VLM2 Laser Diode Module. Ball Mount

SKU: 0221-437-00

Tip/Tilt design with a ball mount to align the laser module. 14.8mm bore and setscrews to hold laser. 1/4"-20 mounting hole in base.

Mount for VLM3 Laser Diode Module. Ball Mount

SKU: 0221-448-00

Tip/Tilt design with a ball mount to align the laser module. 9.5mm bore and setscrews to hold laser. 1/4"-20 mounting hole in base.

Mount for Ultra Low Noise (ULN) Laser Diode Module. Ball Mount

SKU: 0221-449-00

Tip/Tilt design with a ball mount to align the laser module. 19mm bore and setscrews to hold laser. 1/4"-20 mounting hole in base.

Power Supply for VLM2 or VLM3 laser modules.

SKU: 31-1001-000

Power Supply for Laser Modules with 3.5mm Jack Plug. Input 90-250 VAC. Output 5 VDC.

3.5mm Jack Plug for VLM lasers

SKU: 1057734

Add a plug to the flying leads of any VLM series laser to then have it connect easily to the power supply.