PowerMax-RS PS10Q

PowerMax-RS PS10Q

SKU 1288992
UOM Each

RS232-enabled, 100 µW to 1W low power sensor, 0.3 to 2 µm spectral range, 10 mm diameter active area with quartz window.


Price $2,535.00 USD


Details

Low power thermopile for measuring pulsed & CW lasers between 100 µW and 1W. Includes a quartz window to more effectively eliminate thermal background radiation. Direct RS232 interface.

 

Key Features:

·      100 µW to 1W range

·      10 mm diameter active area

·      Spectrally flat broadband coating

·      0.3 to 2 µm spectral range

·      Quartz window

·      Convective air-cooled

·      Direct RS232 interface

·      ISO 17025 accredited

This PowerMax-RS PS10Q sensor is a thermally stabilized, amplified thermopile power sensor intended for measuring low power lasers down into the 100 µW range, making it ideal for measuring laser diodes, HeNe and ion lasers, and other low power laser sources. It includes a quartz window to more effectively eliminate thermal background radiation. Note that the window limits the spectral range to 0.3 to 2.1 µm.

The sensor is terminated in an RS232 cable that interfaces directly to a PC or industrial controller. DB25 (PN 1098400) and USB direct (PN 1287077) are available.

Specs

General

Cable Type
RS232
Cooling Type
Air
Power Range
100 µW to 1W
Active Area Diameter
10 mm
Detector Coating
Black
Noise Equivalent Power (milliwatts)
0.003
Maximum Intermittent Power (watts)(<5 minutes)
3
Long-Pulse Joules Range (joules)
0.001 to 1
Wavelength Range (micrometers)
0.3 to 2.1 µm
Maximum Power Density (kilowatts per square centimeter)
500 W/cm²
Maximum Energy Density (millijoules per square centimeter)
50 mJ/cm² 10 ns, 1064 nm
Response Time, Speed-up On, 0% to 95% (seconds)
2
Window
Yes
Diffuser
None
Calibration Uncertainty (%)(k=2)
±1
Power Linearity (%)
±1
Spectral Compensation Accuracy (%)
±1.5
Calibration Wavelength (nanometers)
514
Cable Length (meters)
0.3

Resources

Datasheets
Owner's Manuals
Owner's Manuals
Drawings
Software
Software
Software