Compact laser power sensor for intermittent use from 100 mW to 150W. Beam position sensing, 0.25 to 10.6 µm spectral range, 19 mm diameter active area.

Price $1,835.00 USD

Details

Compact convectively cooled thermopile for measuring pulsed & CW lasers intermittently up to 150W with beam position measurement:

2 minutes at 150W

5 minutes at 100W

20 minutes at 40W

Key Features:

· 100 mW to 150W range (intermittent)

· 19 mm diameter active area

· Beam position measurement

· Spectrally flat broadband coating

· 0.25 to 10.6 µm spectral range

· Air cooled

· Fiber adapters available

· ISO 17025 accredited

This compact LM-150 LS sensor is designed for intermittent use at higher powers up to 150W (for two minutes) without water or fan cooling. It is terminated in a SmartSensor DB25 cable and is directly compatible with LabMax-TOP, LabMax-TO and LabMax-Pro SSIM meters. A Thermal SmartSensor Adapter PN 1056827 is required to use this sensor with FieldMate, FieldMaxII-TOP and FieldMaxII-TO meters.

A USB-direct (PN 1275678) model is available.

This LM-150 LS version has a rectangular form factor, whereas the LM-150 FS (PN 1098394) is round.

SMA fiber adapter (PN 1098589) and FC/PC fiber adapter (PN 1098339) accessories are available when used with 1.035-40M Adapter Ring (PN 33-9432-000).

These unique position sensing thermopiles display the position of the incident beam on the sensor disk, in addition to measuring power when used with the LabMax and LabMax-Pro meters. This information allows the user to safely and precisely align the sensor and the beam being measured. This is particularly useful for non-visible beams.

Specs

General

Cable Type

LM DB-25

Cooling Type

Air

Power Range

100 mW to 150W

Active Area Diameter

19 mm

Detector Coating

Broadband

Noise Equivalent Power (milliwatts)

Long-Pulse Joules Range (joules)

0.5 to 10

Wavelength Range (micrometers)

0.25 to 10.6

Maximum Power Density (kilowatts per square centimeter)

Maximum Energy Density (millijoules per square centimeter)

600, 1064 nm, 10 ns

Response Time, Speed-up On, 0% to 95% (seconds)

Window

None

Diffuser

None

Calibration Uncertainty (%)(k=2)

±5

Power Linearity (%)

±1

Spectral Compensation Accuracy (%)

±1.5

Calibration Wavelength (nanometers)

10600

Cable Length (meters)

1.8

Resources

Datasheets

View

Drawings

View

LM-150 LS

LM-150 LS

Details

Specs

Resources

Accessories

PowerMax-USB LM-150 LS

LM-150 FS

Thermal SmartSensor Adapter

LabMax-TOP - Laser Power and Energy Meter

LabMax-TO - Laser Power Meter

LabMax-Pro SSIM - Laser Power and Energy Meter

SMA-Type Connector

FC/PC Type Connector

1.035-40M Adapter Ring