This BeamFinder sensor is terminated in a SmartSensor DB25 cable and is directly compatible with LabMax-TOP, LabMax-TO and LabMax-Pro SSIM meters. A Thermal SmartSensor Adapter PN 1056827 is required to use this sensor with FieldMate, FieldMaxII-TOP and FieldMaxII-TO meters.

USB-direct (PN 1174268) and RS232-direct (PN 1180872) models are available.

These unique position sensing thermopiles display the position of the incident beam on the sensor disk, in addition to measuring power when used with the LabMax and LabMax-Pro meters. This information allows the user to safely and precisely align the sensor and the beam being measured. This is particularly useful for non-visible beams.

Specs

General

Cable Type

LM DB-25

Cooling Type

Water

Power Range

100W to 1000W

Active Area Diameter

38 mm

Detector Coating

Broadband

Noise Equivalent Power (milliwatts)

Wavelength Range (micrometers)

0.25 to 10.6

Maximum Power Density (kilowatts per square centimeter)

1 to 2.5

Maximum Energy Density (millijoules per square centimeter)

600, 1064 nm, 10 ns

Response Time, Speed-up On, 0% to 95% (seconds)

Window

None

Diffuser

None

Calibration Uncertainty (%)(k=2)

±5

Power Linearity (%)

±1

Spectral Compensation Accuracy (%)

±1.5

Calibration Wavelength (nanometers)

10600

Cable Length (meters)

Resources

Datasheets

View

Drawings

View

LM-1000

LM-1000

Details

Specs

Resources

Accessories

PowerMax-USB LM-1000

PowerMax-RS LM-1000

Thermal SmartSensor Adapter

LabMax-TOP - Laser Power and Energy Meter

LabMax-TO - Laser Power Meter

LabMax-Pro SSIM - Laser Power and Energy Meter