100 mW to 25W laser power sensor with beam position sensing, 0.25 to 10.6 µm spectral range, 19 mm diameter active area.
Convectively cooled thermopile for measuring pulsed & CW lasers up to 25W with beam position measurement.
Key Features:
· 100 mW to 25W range
· 19 mm diameter active area
· Beam position measurement
· Capable of 45W intermittently for up to 5 minutes
· Spectrally flat broadband coating
· 0.25 to 10.6 µm spectral range
· Convective air-cooled
· Fiber adapters available
· ISO 17025 accredited
This LM-45 sensor is terminated in a SmartSensor DB25 cable and is directly compatible with LabMax-TOP, LabMax-TO and LabMax-Pro SSIM meters. A Thermal SmartSensor Adapter PN 1056827 is required to use this sensor with FieldMate, FieldMaxII-TOP and FieldMaxII-TO meters.
USB-direct (PN 1168342) and RS232-direct (PN 1211474) models are available.
SMA fiber adapter (PN 1098589) and FC/PC fiber adapter (PN 1098339) accessories are available when used with 1.035-40M Adapter Ring (PN 33-9432-000).
These unique position sensing thermopiles display the position of the incident beam on the sensor disk, in addition to measuring power when used with the LabMax and LabMax-Pro meters. This information allows the user to safely and precisely align the sensor and the beam being measured. This is particularly useful for non-visible beams.
General
1168342
$1,965.00 USD
1211474
$1,855.00 USD
1056827
$575.00 USD
1104622
$2,380.00 USD
1104619
$2,095.00 USD
1268881
$1,635.00 USD
1098589
$130.00 USD
1098339
$215.00 USD
33-9432-000
$85.00 USD