Single-mode

PM1300G-80/170-5, PM Panda-Type Gyro, Optical Fiber

SKU: PM1300G-80/170-5

Coherent 1300 nm PANDA-style PM Gyroscope fibers have extremely high birefringence and exceptionally tight dimensional specifications, critical for manufacturing high precision, high-performance gyro-coils. High consistency and extreme end-to-end control of optical properties provide particular advantage in this application by reducing fiber generated signal artifacts. The intrinsically high level of radiation resistance allows operation for extended periods of time on low earth orbits, near and deep space, and applications where exposure to man-made radiation is expected. The Panda-style configuration is preferred over bow-tie or elliptical clad designs because of its advantages in process scalability and product uniformity. These fibers are offered in industry standard specifications and Coherent high performance (HP) versions optimized for exceptional splicability and offering the tightest tolerance specifications available.

PME1300G-80/170-5, PM Elliptical-Clad Gyro, Optical Fiber

SKU: PME1300G-80/170-5

Coherent elliptical clad PM Gyroscope fibers have high birefringence and are designed for gyroscope and sensor applications. These fibers feature good bending performance and are optimized for either 850 nm or 1300 nm wavelength operation. The 850 nm optimized fiber has a 40 µm clad diameter and the 1300 nm optimized fiber has an 80 µm clad diameter. Both are ideally suited for applications requiring a small form factor.

PM1300G-80/170-2HP, High-Performance PM Panda-Type Gyro, Optical Fiber

SKU: PM1300G-80/170-2HP

Coherent 1300 nm PANDA-style PM Gyroscope fibers have extremely high birefringence and exceptionally tight dimensional specifications, critical for manufacturing high precision, high-performance gyro-coils. High consistency and extreme end-to-end control of optical properties provide particular advantage in this application by reducing fiber generated signal artifacts. The intrinsically high level of radiation resistance allows operation for extended periods of time on low earth orbits, near and deep space, and applications where exposure to man-made radiation is expected. The Panda-style configuration is preferred over bow-tie or elliptical clad designs because of its advantages in process scalability and product uniformity. These fibers are offered in industry standard specifications and Coherent high performance (HP) versions optimized for exceptional splicability and offering the tightest tolerance specifications available.

PM1300G-80/135-2HP, High-Performance PM Panda-Type Gyro, Optical Fiber

SKU: PM1300G-80/135-2HP

Coherent 1300 nm PANDA-style PM Gyroscope fibers have extremely high birefringence and exceptionally tight dimensional specifications, critical for manufacturing high precision, high-performance gyro-coils. High consistency and extreme end-to-end control of optical properties provide particular advantage in this application by reducing fiber generated signal artifacts. The intrinsically high level of radiation resistance allows operation for extended periods of time on low earth orbits, near and deep space, and applications where exposure to man-made radiation is expected. The Panda-style configuration is preferred over bow-tie or elliptical clad designs because of its advantages in process scalability and product uniformity. These fibers are offered in industry standard specifications and Coherent high performance (HP) versions optimized for exceptional splicability and offering the tightest tolerance specifications available.

FUD-3502, CMS6, Optical Fiber

SKU: FUD-3502

You have selected an application designed fiber, not fully released which may have a longer lead time than our standard products.

FUD-3420, SM-SDF-6/130, Optical Fiber

SKU: FUD-3420

You have selected an application designed fiber, not fully released which may have a longer lead time than our standard products.

FUD-4247, PM850G-45-ECG, Optical Fiber

SKU: FUD-4247

You have selected an application designed fiber, not fully released which may have a longer lead time than our standard products.

PM1060L-FA, Panda-Type Double Clad PM Optical Fiber

SKU: PM1060L-FA

Broad line of PM fibers now includes PM1060L & PM1060L-FA fibers. These fibers are optimized for operation at 1060 nm and feature a low 0.085 NA (L). They are ideally designed for pump combiner and coupler applications for single-mode fiber lasers. The PM1060L fiber is a single clad fiber and PM106-FA is double clad fiber to cover all your application needs. Utilizing the PANDA design, these fibers demonstrate superior polarization control, resulting in increased system efficiencies.

This product requires a purchase of a minimum quantity of : 9

PM-NDF-5/125, PM Nd-Doped Double Clad, Optical Fiber

SKU: PM-NDF-5/125

Coherent Neodymium doped PM-double clad fiber is specifically designed for efficient single mode operation around 1060 nm when cladding pumped at 808nm. A 6 µm mode field diameter allows low splice losses to standard single mode fibers and the 125 µm cladding diameter is compatible with a variety of industry standard pump combiners. The polarization maintaining design enables construction of pulsed and CW PM fiber amplifiers.

This product requires a purchase of a minimum quantity of : 5

PM-YDF-5/130-VIII, PM Yb-Doped Double Clad, Optical Fiber

SKU: PM-YDF-5/130-VIII

Coherent general purpose Ytterbium-Doped Double-Clad Fiber is available in two-versions €” PANDA-style, polarization-maintaining (PM) and non-PM. Designed specifically for CW applications around 1-15 W, these fibers are ideal for applications requiring low-cost fiber laser and amplifier source, such as laser marking, fiber amplifier pumps and IR sources for frequency doubling. These fibers’ telecom-type geometrics are compatible with readily available low-cost pump diodes and fiber-based components.

This product requires a purchase of a minimum quantity of : 5

SM-YDF-5/130-VIII, Yb-Doped Double Clad, Optical Fiber

SKU: SM-YDF-5/130-VIII

Coherent general purpose Ytterbium-Doped Double-Clad Fiber is available in two-versions €” PANDA-style, polarization-maintaining (PM) and non-PM. Designed specifically for CW applications around 1-15 W, these fibers are ideal for applications requiring low-cost fiber laser and amplifier source, such as laser marking, fiber amplifier pumps and IR sources for frequency doubling. These fibers’ telecom-type geometrics are compatible with readily available low-cost pump diodes and fiber-based components.

This product requires a purchase of a minimum quantity of : 8

FUD-3575, SM-GSF-8/125, Optical Fiber

SKU: FUD-3575

You have selected an application designed fiber, not fully released which may have a longer lead time than our standard products.

FUD-3584, SM-GSF-10/125, Optical Fiber

SKU: FUD-3584

You have selected an application designed fiber, not fully released which may have a longer lead time than our standard products.

This product requires a purchase of a minimum quantity of : 16

SM-GSF-8/130-M, Matched Passive Single Clad, Optical Fiber

SKU: SM-GSF-8/130-M

Coherent single mode (SM) passive single and double clad fibers are ideally suited for applications spanning military, industrial and medical including fiber lasers and amplifiers. These fibers feature an 8 micron diameter core and 130 micron diameter clad size with a low NA (0.10) core. They are precision matched to their SM Yb-doped 8/130 matched counterparts to ensure excellent splice compatibility and low loss. These fibers are proof-tested to 100 kpsi, an industry requirement for long term reliability. They utilize the latest fiber design and the double clad fiber features NuCOATFA coating technology to ensure excellent preservation of beam quality and extended operating life demanded by today’s industrial fiber laser applications.

This product requires a purchase of a minimum quantity of : 69

SM-YDF-8/130-9M, Matched Yb-Doped Double Clad, Optical Fiber

SKU: SM-YDF-8/130-9M

NuGEN9 active fibers offer the most advanced glass composition and fiber design and are all precision matched to their passive counterpart ensuring excellent splice compatibility and low loss. This fiber is a Yb-doped single mode (SM) active double clad fiber featuring an 8 micron diameter core and 130 micron clad diameter with a core NA of 0.095. This fiber is ideally suited for applications spanning military, industrial and medical applications. NuGEN9 fibers feature an optimized glass composition enabling higher absorption with superior photodarkening performance. These fibers are proof-tested to 100 kpsi, an industry requirement for long term reliability. NuGEN9 fibers are exclusively offered with Coherent proprietary NuCOATFA coating technology with the best wet and dry heat performance available, ensuring excellent preservation of beam quality and extended operating life.

This product requires a purchase of a minimum quantity of : 6

SM-GDF-8/130-M, Matched Passive Double Clad, Optical Fiber

SKU: SM-GDF-8/130-M

Coherent single mode (SM) passive single and double clad fibers are ideally suited for applications spanning military, industrial and medical including fiber lasers and amplifiers. These fibers feature an 8 micron diameter core and 130 micron diameter clad size with a low NA (0.10) core. They are precision matched to their SM Yb-doped 8/130 matched counterparts to ensure excellent splice compatibility and low loss. These fibers are proof-tested to 100 kpsi, an industry requirement for long term reliability. They utilize the latest fiber design and the double clad fiber features NuCOATFA coating technology to ensure excellent preservation of beam quality and extended operating life demanded by today’s industrial fiber laser applications.

This product requires a purchase of a minimum quantity of : 62

PM-YSF-LO-HP, Panda-Type Yb-Doped Select Cutoff PM, Optical Fiber

SKU: PM-YSF-LO-HP

Coherent single-mode Yb-doped fibers are designed to support low power fiber lasers and amplifiers based on singlemode diode pump technology, rather than the multimode pumps used in high-power applications. For applications where high efficiency and very short device lengths are critical, these single-mode fibers are compatible with standard "telecom" fiber technology ensuring low splice loss to numerous fiber pigtailed components. The PM variety is designed with the PANDA-style stress structure which delivers linearly polarized light suitable for frequency conversion. These fibers make the ideal gain medium for low average power femtosecond fiber lasers and pre-amplifiers for higher power double-clad amplifiers. These High Performance (-HP) versions provide higher optical and geometric tolerances, improving device performances, system compatability and manufacturing process control.

This product requires a purchase of a minimum quantity of : 4

LMA-YSF-10/125, Yb-Doped Select Cutoff SM, Optical Fiber

SKU: LMA-YSF-10/125

Coherent single-clad series of Yb-doped large mode area (LMA) fibers are designed to support low power fiber lasers and amplifiers based on single-mode diode pump technology. These 10µm core diameter fibers with a 0.075 NA provide SM beam output and are compatible with standard "telecom" fiber technology ensuring low splice loss to numerous fiber pigtailed components. Featuring an optimized glass composition with high absorption these fibers provide high efficiency and very short device lengths minimizing non-linear effects. The PM (PLMA) version uses a PANDA-style stress structure which delivers linearly polarized light suitable for frequency conversion. These fibers make the ideal gain medium for low average power ultrafast fiber lasers and pre-amplifiers for higher power double-clad amplifiers.

This product requires a purchase of a minimum quantity of : 4

SM-YSF-HI-HP, Yb-Doped Select Cutoff SM, Optical Fiber

SKU: SM-YSF-HI-HP

Coherent single-mode Yb-doped fibers are designed to support low power fiber lasers and amplifiers based on singlemode diode pump technology, rather than the multimode pumps used in high-power applications. For applications where high efficiency and very short device lengths are critical, these single-mode fibers are compatible with standard "telecom" fiber technology ensuring low splice loss to numerous fiber pigtailed components. These fibers make the ideal gain medium for low average power femtosecond fiber lasers and pre-amplifiers for higher power double-clad amplifiers. These High Performance (-HP) versions provide tighter optical and geometric tolerances, improving device performances, system compatibility and manufacturing process control.

This product requires a purchase of a minimum quantity of : 6

PLMA-YSF-10/125, Panda-Type Yb-Doped Select Cutoff PM Optical Fiber

SKU: PLMA-YSF-10/125

Coherent single-clad series of Yb-doped large mode area (LMA) fibers are designed to support low power fiber lasers and amplifiers based on single-mode diode pump technology. These 10µm core diameter fibers with a 0.075 NA provide SM beam output and are compatible with standard "telecom" fiber technology ensuring low splice loss to numerous fiber pigtailed components. Featuring an optimized glass composition with high absorption these fibers provide high efficiency and very short device lengths minimizing non-linear effects. The PM (PLMA) version uses a PANDA-style stress structure which delivers linearly polarized light suitable for frequency conversion. These fibers make the ideal gain medium for low average power ultrafast fiber lasers and pre-amplifiers for higher power double-clad amplifiers.

This product requires a purchase of a minimum quantity of : 3

SM-YSF-LO-HP, Yb-Doped Select Cutoff SM, Optical Fiber

SKU: SM-YSF-LO-HP

Coherent single-mode Yb-doped fibers are designed to support low power fiber lasers and amplifiers based on singlemode diode pump technology, rather than the multimode pumps used in high-power applications. For applications where high efficiency and very short device lengths are critical, these single-mode fibers are compatible with standard "telecom" fiber technology ensuring low splice loss to numerous fiber pigtailed components. These fibers make the ideal gain medium for low average power femtosecond fiber lasers and pre-amplifiers for higher power double-clad amplifiers. These High Performance (-HP) versions provide tighter optical and geometric tolerances, improving device performances, system compatability and manufacturing process control.

This product requires a purchase of a minimum quantity of : 6

FUD-3499, PM085 LNA-FA Optical Fiber

SKU: FUD-3499

You have selected an application designed fiber, not fully released which may have a longer lead time than our standard products.

This product requires a purchase of a minimum quantity of : 7

FUD-3561, PM075 LNA Optical Fiber

SKU: FUD-3561

You have selected an application designed fiber, not fully released which may have a longer lead time than our standard products.

FUD-3460, PM085 LNA Optical Fiber

SKU: FUD-3460

You have selected an application designed fiber, not fully released which may have a longer lead time than our standard products.

FUD-3563, PM095-1550 LNA, Optical Fiber

SKU: FUD-3563

You have selected an application designed fiber, not fully released which may have a longer lead time than our standard products.