Laser and Amplifier

PLMA-YDF-30/250-HI-8, PM Yb-Doped Double Clad, Optical Fiber

SKU: PLMA-YDF-30/250-HI-8

Coherent polarization maintaining 30/250 Ytterbium-doped double clad fibers based on Gen. VIII glass composition, offers a higher Yb dopant concentration than our original 30/250 LMA fibers. These fibers are specifically designed for short pulse amplification where fiber length is a critical design factor because of very high peak powers. The high absorption enables very short fiber amplifier lengths which will allow the fiber to operate at higher peak pulse powers without exceeding non-linear thresholds or sacrificing efficiency. Short pulse fiber amplifiers can be considered low-cost replacements for Nd:YAG lasers used in materials processing, LIDAR and range finding applications. This high absorption 30/250 Large Mode Area fiber is available in both a standard and a PANDA-style PM format.

This product requires a purchase of a minimum quantity of : 2

PLMA-YDF-25/250-VIII, PM Yb-Doped Double Clad Optical Fiber

SKU: PLMA-YDF-25/250-VIII

Coherent 25/250 Ytterbium-doped double clad fiber is ideally suited for high peak power pulsed fiber amplifier applications. Based on a waveguide structure that supports less modes than the 30/250 fiber, this fiber is incorporated into components and monolithic designs where maintaining beam quality can be more difficult. Both non-PM and PANDA-style PM fibers are available, as are a range of support fibers for component and pigtail development efforts. As with all Coherent standard Large Mode Area (LMA) fibers, these fibers are proof-tested to 100 kpsi, an industry requirement for long term reliability when coiling for mode filtering.

PLMA-YDF-30/400-VIII, PM Yb-Doped Double Clad, Optical Fiber

SKU: PLMA-YDF-30/400-VIII

Coherent 30/400 Ytterbium-doped double clad fiber is designed to combine the features of large 30 µm core diameter for generating high pulse energy together with a large 400 µm cladding optimized for high average powers, while still delivering good beam quality through the adoption of LMA fiber design. Available with latest generation of glass technology, the Gen. VIII 30/400-YDF fiber is available in two versions-standard and PANDA-stye PM.

PM-YDF-5/130-VIII, PM Yb-Doped Double Clad, Optical Fiber

SKU: PM-YDF-5/130-VIII

Coherent general purpose Ytterbium-Doped Double-Clad Fiber is available in two-versions €” PANDA-style, polarization-maintaining (PM) and non-PM. Designed specifically for CW applications around 1-15 W, these fibers are ideal for applications requiring low-cost fiber laser and amplifier source, such as laser marking, fiber amplifier pumps and IR sources for frequency doubling. These fibers’ telecom-type geometrics are compatible with readily available low-cost pump diodes and fiber-based components.

This product requires a purchase of a minimum quantity of : 5

LMA-YDF-25/250-M, Matched Yb-Doped Double Clad, Optical Fiber

SKU: LMA-YDF-25/250-M

Coherent matched series of Large Mode Area (LMA) double clad fibers are ideal for high power monolithic fiber lasers and amplifiers. Featuring a matching set of LMA fibers, this series of fibers ensure splice compatibility across the entire chain of 25/250 fiber components required to make monolithic fiber lasers. This matched fiber series is based on a 25 micron diameter core and 250 micron diameter clad size with a low NA (0.065) core and consists of Yb-doped fiber and passive beam delivery fibers all made to highest tolerances in the industry. All fibers utilize the latest glass composition and NuCOAT coating technology to ensure high slope efficiency, extended operating life and excellent beam quality at the high power levels demanded by today’s industrial fiber laser applications. These precision matched LMA fiber sets are available in non-PM (LMA) and PM (PLMA) versions.

This product requires a purchase of a minimum quantity of : 4

PLMA-YDF-30/250-VIII, PM Yb-Doped Double Clad, Optical Fiber

SKU: PLMA-YDF-30/250-VIII

Coherent 30/250 Ytterbium-doped double clad Fiber is specifically designed for short pulse amplification where fiber length is a critical design factor because of very high peak powers. The high absorption enables very short fiber amplifier lengths without sacrificing efficiency. Short pulse fiber amplifiers can be considered low-costreplacements for Nd:YAG lasers used in materials processing, LIDAR and range finding applications. This 30/250 Large Mode Area fiber is available in both a standard and a PANDA-style PM format. Coherent also offers alternate versions of these fibers with higher Yb dopant concentration.

This product requires a purchase of a minimum quantity of : 3

PLMA-YDF-25/250-M, Matched PM Yb-Doped Double Clad Optical Fiber

SKU: PLMA-YDF-25/250-M

Coherent matched series of Large Mode Area (LMA) double clad fibers are ideal for high power monolithic fiber lasers and amplifiers. Featuring a matching set of LMA fibers, this series of fibers ensure splice compatibility across the entire chain of 25/250 fiber components required to make monolithic fiber lasers. This matched fiber series is based on a 25 micron diameter core and 250 micron diameter clad size with a low NA (0.065) core and consists of Yb-doped fiber and passive beam delivery fibers all made to highest tolerances in the industry. All fibers utilize the latest glass composition and NuCOATFA coating technology to ensure high slope efficiency, extended operating life and excellent beam quality at the high power levels demanded by today’s industrial fiber laser applications. These precision matched LMA fiber sets are available in non-PM (LMA) and PM (PLMA) versions.

LMA-YDF-30/250-VIII, Yb-Doped Double Clad, Optical Fiber

SKU: LMA-YDF-30/250-VIII

Coherent 30/250 Ytterbium-doped double clad Fiber is specifically designed for short pulse amplification where fiber length is a critical design factor because of very high peak powers. The high absorption enables very short fiber amplifier lengths without sacrificing efficiency. Short pulse fiber amplifiers can be considered low-costreplacements for Nd:YAG lasers used in materials processing, LIDAR and range finding applications. This 30/250 Large Mode Area fiber is available in both a standard and a PANDA-style PM format. Coherent also offers alternate versions of these fibers with higher Yb dopant concentration.

This product requires a purchase of a minimum quantity of : 4

PLMA-YDF-15/130-VIII, PM Yb-Doped Double Clad, Optical Fiber

SKU: PLMA-YDF-15/130-VIII

Coherent polarization maintaining, Large Mode Area (LMA), Ytterbium-doped double clad fiber is ideal for linearly polarized high power fiber lasers and amplifiers used in military, industrial, and medical applications. LMA Yb-doped fibers enable efficient, compact, diode pumped fiber sources that are an attractive alternative to traditional solid-state lasers. This fiber features a large core/cladding ratio with a low NA (0.08) and is ideally suited for pulsed laser applications.

SM-YDF-5/130-VIII, Yb-Doped Double Clad, Optical Fiber

SKU: SM-YDF-5/130-VIII

Coherent general purpose Ytterbium-Doped Double-Clad Fiber is available in two-versions €” PANDA-style, polarization-maintaining (PM) and non-PM. Designed specifically for CW applications around 1-15 W, these fibers are ideal for applications requiring low-cost fiber laser and amplifier source, such as laser marking, fiber amplifier pumps and IR sources for frequency doubling. These fibers’ telecom-type geometrics are compatible with readily available low-cost pump diodes and fiber-based components.

This product requires a purchase of a minimum quantity of : 8

LMA-GDF-20/400-M, Matched Passive Double Clad, Optical Fiber

SKU: LMA-GDF-20/400-M

Coherent Large Mode Area (LMA) and Polarization Maintaining LMA (PLMA) passive double clad fiber are ideal for high power fiber lasers and amplifiers used in military, industrial, and medical applications. These fibers feature a 20 micron diameter core and 400 micron diameter clad size with a low NA (0.065) core. They are precision matched to their active Yb-doped 20/400 LMA and PLMA matched counterparts to ensure excellent splice compatability and low loss. As with all Coherent standard Large Mode Area (LMA) fibers, these fibers are proof-tested to 100 kpsi, an industry requirement for long term reliability. They utilize the latest fiber design and NuCOATFA coating technology to ensure excellent preservation of beam quality and extended operating life at the high power levels demanded by today’s industrial fiber laser applications. These precision matched fibers are available in both non-PM and PANDA-style PM fibers.

This product requires a purchase of a minimum quantity of : 12

PLMA-YDF-25/400-M, Matched PM Yb-Doped Double Clad, Optical Fiber

SKU: PLMA-YDF-25/400-M

Large Mode Area (LMA) double clad fibers are ideal for high power monolithic fiber lasers and amplifiers. Featuring a matching set of LMA fibers, this series of fibers ensure splice compatibility across the entire chain of 25/400 fiber components required to make monolithic fiber lasers. This matched fiber series is based on a 25-micron diameter core, and 400 micron diameter clad size with a low NA (0.065) core and consists of Yb-doped fiber and passive beam delivery fibers all made to highest tolerances in the industry. All fibers utilize the latest glass composition and NuCOATFA coating technology to ensure high slope efficiency, extended operating life, and excellent beam quality at the high power levels demanded by today’s industrial fiber laser applications. These precision matched LMA fiber sets are available in non-PM (LMA) and PM (PLMA) versions.

LMA-YDF-15/130-VIII, Yb-Doped Double Clad, Optical Fiber

SKU: LMA-YDF-15/130-VIII

Coherent polarization maintaining, Large Mode Area (LMA), Ytterbium-doped double clad fiber is ideal for linearly polarized high power fiber lasers and amplifiers used in military, industrial, and medical applications. LMA Yb-doped fibers enable efficient, compact, diode pumped fiber sources that are an attractive alternative to traditional solid-state lasers. This fiber features a large core/cladding ratio with a low NA (0.08) and is ideally suited for pulsed laser applications.

This product requires a purchase of a minimum quantity of : 4

LMA-YDF-10/400-VIII, Yb-Doped Double Clad, Optical Fiber

SKU: LMA-YDF-10/400-VIII

Coherent Large Mode Area (LMA) Ytterbium-Doped Double Clad Fiber is ideal for high power fiber lasers and amplifiers used in military, industrial, and medical applications. LMA Yb-doped fibers enable efficient, compact, diode pumped fiber sources that are an attractive alternative to traditional solid-state lasers. This fiber features a 10/400 core/cladding size with a low NA (0.075) core, > 77% slope efficiency, > 100W CW output power and is suitable for use in single-mode applications.

This product requires a purchase of a minimum quantity of : 9

LMA-YDF-20/130-M, Matched Yb-Doped Double Clad, Optical Fiber

SKU: LMA-YDF-20/130-M

Coherent matched series of Large Mode Area (LMA) double clad fibers are ideal for high power monolithic fiber lasers and amplifiers. Featuring a matching set of LMA fibers, this series of fibers ensure splice compatibility across the entire chain of 20/130 fiber components required to make monolithic fiber lasers. This matched fiber series is based on a 20 micron diameter core and 130 micron diameter clad size with a low NA (0.08) core and consists of Yb-doped fiber and passive beam delivery fibers all made to highest tolerances in the industry. All fibers utilize the latest glass composition and NuCOATFA coating technology to ensure high slope efficiency, extended operating life and excellent beam quality at the high power levels demanded by today’s industrial fiber laser applications.

This product requires a purchase of a minimum quantity of : 3

LMA-YDF-30/250-HI-M, Matched Yb-Doped Double Clad Optical Fiber

SKU: LMA-YDF-30/250-HI-M

Coherent precision matched high absorption 30/250 Ytterbium-doped double clad fiber offers a higher Yb dopant concentration than our original 30/250 LMA fibers and tighter geometrical specifications improving splice loss and mateability. This fiber is specifically designed for short pulse amplification where fiber length is a critical design factor because of very high peak powers. The high absorption enables very short fiber amplifier lengths without sacrificing efficiency. Short pulse fiber amplifiers can be considered low-cost replacements for Nd:YAG lasers used in materials processing, LIDAR and range finding applications. This precision matched active fiber is optimized to match Coherent precision matched passive 30/250 fiber for superior splicing and loss performance.

This product requires a purchase of a minimum quantity of : 3

PLMA-YDF-10/125-M, Matched PM Yb-Doped Double Clad Optical Fiber

SKU: PLMA-YDF-10/125-M

Coherent matched series of Large Mode Area (LMA) double clad fibers are ideal for monolithic fiber lasers and amplifiers. Featuring a matching set of LMA fibers, this series of fibers ensure splice compatibility across the entire chain of 10/130 fiber components required to make monolithic fiber lasers. This matched fiber series is based on a 10 micron diameter core and 130 micron diameter clad size with a low NA (0.075) core and consists of Yb-doped fiber and passive beam delivery fibers all made to highest tolerances in the industry. All fibers utilize the latest glass composition and NuCOATFA coating technology to ensure high slope efficiency, extended operating life and excellent beam quality demanded by today’s industrial fiber laser applications. These precision matched LMA fiber sets are available in non-PM (LMA) and PM (PLMA) versions.

This product requires a purchase of a minimum quantity of : 4

LMA-YDF-10/130-M, Matched Yb-Doped Double Clad, Optical Fiber

SKU: LMA-YDF-10/130-M

Coherent matched series of Large Mode Area (LMA) double clad fibers are ideal for monolithic fiber lasers and amplifiers. Featuring a matching set of LMA fibers, this series of fibers ensure splice compatibility across the entire chain of 10/130 fiber components required to make monolithic fiber lasers. This matched fiber series is based on a 10 micron diameter core and 130 micron diameter clad size with a low NA (0.075) core and consists of Yb-doped fiber and passive beam delivery fibers all made to highest tolerances in the industry. All fibers utilize the latest glass composition and NuCOATFA coating technology to ensure high slope efficiency, extended operating life and excellent beam quality demanded by today’s industrial fiber laser applications. These precision matched LMA fiber sets are available in non-PM (LMA) and PM (PLMA) versions.

This product requires a purchase of a minimum quantity of : 4

PLMA-YDF-20/130-VIII, PM Yb-Doped Double Clad, Optical Fiber

SKU: PLMA-YDF-20/130-VIII

Coherent polarization maintaining, Large Mode Area (LMA), Ytterbium-doped double clad fiber is ideal for linearly polarized high power fiber lasers and amplifiers used in military, industrial, and medical applications. LMA Yb-doped fibers enable efficient, compact, diode pumped fiber sources that are an attractive alternative to traditional solid-state lasers. This fiber features a large core/cladding ratio with a low NA (0.08) and is ideally suited for pulsed laser applications.

LMA-YDF-20/130-VIII, Yb-Doped Double Clad, Optical Fiber

SKU: LMA-YDF-20/130-VIII

Coherent polarization maintaining, Large Mode Area (LMA), Ytterbium-doped double clad fiber is ideal for linearly polarized high power fiber lasers and amplifiers used in military, industrial, and medical applications. LMA Yb-doped fibers enable efficient, compact, diode pumped fiber sources that are an attractive alternative to traditional solid-state lasers. This fiber features a large core/cladding ratio with a low NA (0.08) and is ideally suited for pulsed laser applications.

This product requires a purchase of a minimum quantity of : 3

PLMA-YDF-20/400-M, Matched PM Yb-Doped Double Clad, Optical Fiber

SKU: PLMA-YDF-20/400-M

Coherent matched series of Large Mode Area (LMA) double clad fibers are ideal for high power monolithic fiber lasers and amplifiers. Featuring a matching set of LMA fibers, this series of fibers ensure splice compatibility across the entire chain of 20/400 fiber components, such as fiber Bragg gratings and couplers, required to make monolithic fiber lasers. This matched fiber series is based on a 20 micron diameter core and 400 micron diameter clad size with a low NA (0.065) core and consists of Yb-doped fiber, photosensitive fiber and passive beam delivery fibers all made to highest tolerances in the industry. All fibers utilize the latest glass composition and NuCOATFA coating technology to ensure high slope efficiency, extended operating life and excellent beam quality at the high power levels demanded by today’s industrial fiber laser applications. These precision matched LMA fiber sets are available in non-PM (LMA) and PM (PLMA) versions.

PLMA-GDF-20/400-M, Matched Passive Double Clad, Optical Fiber

SKU: PLMA-GDF-20/400-M

Coherent Large Mode Area (LMA) and Polarization Maintaining LMA (PLMA) passive double clad fiber are ideal for high power fiber lasers and amplifiers used in military, industrial, and medical applications. These fibers feature a 20 micron diameter core and 400 micron diameter clad size with a low NA (0.065) core. They are precision matched to their active Yb-doped 20/400 LMA and PLMA matched counterparts to ensure excellent splice compatability and low loss. As with all Coherent standard Large Mode Area (LMA) fibers, these fibers are proof-tested to 100 kpsi, an industry requirement for long term reliability. They utilize the latest fiber design and NuCOATFA coating technology to ensure excellent preservation of beam quality and extended operating life at the high power levels demanded by today’s industrial fiber laser applications. These precision matched fibers are available in both non-PM and PANDA-style PM fibers.

This product requires a purchase of a minimum quantity of : 8

LMA-YDF-25/400-M, Matched Yb-Doped Double Clad, Optical Fiber

SKU: LMA-YDF-25/400-M

Large Mode Area (LMA) double clad fibers are ideal for high power monolithic fiber lasers and amplifiers. Featuring a matching set of LMA fibers, this series of fibers ensure splice compatibility across the entire chain of 25/400 fiber components required to make monolithic fiber lasers. This matched fiber series is based on a 25-micron diameter core, and 400 micron diameter clad size with a low NA (0.065) core and consists of Yb-doped fiber and passive beam delivery fibers all made to highest tolerances in the industry. All fibers utilize the latest glass composition and NuCOATFA coating technology to ensure high slope efficiency, extended operating life, and excellent beam quality at the high power levels demanded by today’s industrial fiber laser applications. These precision matched LMA fiber sets are available in non-PM (LMA) and PM (PLMA) versions.

LMA-YDF-15/130-M, Matched Yb-Doped Double Clad, Optical Fiber

SKU: LMA-YDF-15/130-M

Coherent precision matched Large Mode Area (LMA), Ytterbium-doped double clad fiber is ideal for high power fiber lasers and amplifiers used in military, industrial, and medical applications. LMA Yb-doped fibers enable efficient, compact, diode pumped fiber sources that are an attractive alternative to traditional solid-state lasers. This fiber features a large core/cladding ratio with a low NA (0.08) and is ideally suited for pulsed laser applications .This precision matched active fiber is optimized to match Coherent precision matched passive 15/130 fiber for superior splicing and loss performance.

This product requires a purchase of a minimum quantity of : 4

FUD-3883, PM-DSF-12/130, Optical Fiber

SKU: FUD-3883

You have selected an application designed fiber, not fully released which may have a longer lead time than our standard products.